Wash Basin Faucet Installation Steps Wash Basin Faucet Purchase Method

Washbasin faucets are one of the many types of faucets. The lavatory faucets used in today's life are mostly used in general-purpose hot and cold water faucets. Faucet faucets provide comfortable water for our daily washing, while being cold. The exchange of hot water is also very convenient. Next, Xiao Bian introduced wash basin faucet installation steps and wash basin faucet purchase methods.

Wash basin faucet installation steps

1, remove the tap, check all the accessories are complete, be sure to remove the dirt around the installation hole and the water supply pipe to ensure that there is no impurities in the water inlet pipe. In order to protect the surface of the faucet from being scratched, Jiuzheng.com recommends wearing gloves for installation.

2, remove the rubber gasket, the gasket is used to relieve the pressure of the metal surface of the faucet in contact with the ceramic basin, protect the ceramic basin, then insert a water inlet pipe, and tighten.

3. Insert the threaded joint into the first inlet hose, and then insert the second inlet hose into the water end through the threaded joint.

4. Screw the second water inlet hose into the water inlet port, pay attention to the correct direction, use force to equalize, and then tighten the threaded joint.

5. Insert two water inlet hoses into the white rubber pad. Put on the lock nut to fix the faucet. Then tighten the sleeve. Lock the two inlet pipes and the angle valve respectively and do not twist the pipe wrench to prevent deformation or even twisting. Pay attention to the connection of hot and cold water. Connect the water outlet angle valve with the other end of the inlet pipe.

Wash basin faucet shopping method

1, wash basin faucet how to choose the weight: can not buy too light faucet, too light is mainly manufacturers in order to reduce costs, hollowing out the internal copper, faucet looks great, do not pick up, more easily withstand water Pressure burst.

2, washbasin faucet How to choose the handle: Composite faucet is easy to use, because when using the sink, usually only one hand is empty.

3, washbasin faucet how to choose the outlet: the outlet on the height to fill the basin becomes simple.

4, washbasin faucet How to choose the spool: This is the heart of the leader, now hot and cold faucets are used ceramic valve core.

Faucet seven maintenance points

1, to ask experienced and qualified professionals for construction and installation. When installing, the faucet should try not to bump with hard objects, do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Pay attention to remove the debris from the pipe and install the faucet.

2. The showerhead metal hose of the bathtub faucet should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose.

3, in the case of water pressure not lower than 0.02mpaz, after using for a period of time, if you find that the amount of water is reduced, or even the phenomenon of water heater turn off, you can gently unscrew the screen cover at the faucet outlet, Remove impurities, generally can recover freely.

4, when the temperature is lower than zero, if you find the handle feel abnormal, you must use hot water shower hot bathroom products to feel normal, in order to continue to use. On the contrary, it will affect the service life of the valve core.

5, because the water contains trace amounts of carbonic acid, and easy to form scale after evaporation on the metal surface will have a corrosive effect on the faucet surface, thus affecting the cleaning and service life of the faucet.

6, switch taps do not use too much force, gently turning homeopathic can. Even a traditional faucet does not need to be screwed to death. In particular, the handle cannot be supported or used as a handrail.

7. The phenomenon of water dripping after the faucet is turned off is because there is still some water in the cavity after the faucet is closed. This is a normal phenomenon. However, if dripping occurs for a long period of time (more than ten minutes), it is a faucet leak, which is a product quality problem.

Editor's summary: About the wash basin faucet installation steps and wash basin faucet shopping methods are introduced here, I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Wash basin bathroom wash basin sink basin faucet